diff --git a/content/06_vr/0_intro.md b/content/06_vr/0_intro.md
index bea52ad850a08b7f1e0082a209332af999192b17..254e701a55a7581f0b604b37360080673bbd41fb 100644
--- a/content/06_vr/0_intro.md
+++ b/content/06_vr/0_intro.md
@@ -14,13 +14,18 @@ align: center
 ```
 
 ## Reservations
-Room reservertion of the AR-Lab by mail to
+Room reservation of the AR-Lab by mail to
 - Beate Jaworski [B.Jaworski@ibmb.tu-bs.de](mailto:B.Jaworski@ibmb.tu-bs.de)
 
+## Key
+The key for the VR-Lab can be picked up at the iRMB institute from the administration team Michael Kos or [Fritz Lewall](https://www.tu-braunschweig.de/irmb/institut/mitarbeiter/lewall).
+
 ## Options to use the Projector
-Using the ipad in the VR-Lab you can switch on the projector system and choose between the following options:
+At first the VR-Desk must be wheeled out of the projector room and into the main room. The VR-Desk is equipped with a Monitor, Mouse, Keyboard, VR-Glasses and a iPad. The Power and the Lan Connector needs to be connected to the floor outlets next to the window.
+
+Afterwards using the iPad one can switch on the projector system and choose between the following options:
 
 - Presentation: extends the PC-Desktop to the projector
 - Click Share: allows to connect any device connected to usb-click share device to the projector
 - VR Modus: enables the 3D VR-Mode, which can be used with [Paraview](./1_paraview.md)
-- Laptop: enables the hdmi input located in floor next to the window
\ No newline at end of file
+- Laptop: enables the HDMI input located in the floor next to the window
\ No newline at end of file
diff --git a/content/06_vr/2_advanced.md b/content/06_vr/2_advanced.md
index d2e5351e2ebd4f2a7ea5b08ca588a401cc0ee5f4..933dd05f920861d2a757257dfb5c9e8497311fe0 100644
--- a/content/06_vr/2_advanced.md
+++ b/content/06_vr/2_advanced.md
@@ -17,7 +17,7 @@ Using the frontend of the projector: [http://192.168.0.111:9999](http://192.168.
 :align: center
 ```
 
-To support sligning the image one can add a Test Pattern under Image/Test Pattern.
-Additionally the image can be shifted using the projector remote control (located in the installation room). However this is very rough and should not be used for fine tuning. The projector is mounted on a fixed platform and the lense can only be moved in a very small range. Therefore the image shift should be done using the frontend.
+To support shifting the image one can add a Test Pattern under Image/Test Pattern.
+Additionally, the image can be shifted using the projector remote control (located in the installation room). However, this is very rough and should not be used for fine-tuning. The projector is mounted on a fixed platform and the lens can only be moved in a very small range. Therefore the image shift should be done using the frontend.